Logo
    Contact us
    RONYAN CNC MACHINERY CO., LTD
    Tel:+86-769-81767961
    Fax:+86-769-81767962
    Mobile:+86-013925874136 13431125835
    ADD:D6-2 chang ron International ,Chang'an Town ,Dongguan City,China
    Industry dynamics Location:Home >> News >> Industry dynamics >> Detailed content

    How to enhance the life of the wire cutting machine guide wheel

    release time:2018-05-23  viewed:1353次
    Wire cutting machine guide wheel life - the life of the guide wheel is not calculated according to time, depends on what kind of material you process, as well as the quality of cutting fluid, better than bad can be judged by inspection .
     
    Tightly tighten the wire, raise the height to more than 300, turn on the machine, and check the jitter degree of the molybdenum wire before and after. If the jitter is too large, it means that there is a problem with the front and rear guide pulleys or bearings. It needs to be removed for inspection. If it cannot be used, it needs to be replaced.
     
    If the jitter is not too large and it is indirect, you can continue to machine parts that do not require high accuracy.
    The
    Check the cut off the workpiece, if the surface of the workpiece under the correct pulse width between the processing of a clear silk mark or precision error, it also means that the need to replace the guide wheel and the bearing.
     
    Guide wheel replacement should not be beaten the bearing, the force can not be too large, have an impact on the bearing life of the guide wheel.
     
    Usually, always tighten the wire, and the looseness of the wire will also affect the life of the guide wheel.
     
    There is also the most important point: the use of the original guide wheel spare parts and special water-based hydraulic fluid cutting BMW Ma line, the overall maintenance of the machine tool has a certain degree of help.
     

    A previous: Three different control methods and characteristics of WEDM
    Next news: Wire EDM processing work environment requirements
    hotline line
    About us
    List enterprise profile
    List corporate culture
    List organizational structure
    List The board of directors.
    Products
    List CNC Medium Speed Wire Cut Electric Discharge Machi
    List Intelligent High-Speed Wire Cut Electrical Dischar
    List Numeric control Electric spark shaping machine
    List EMD drilling machines
    List Wire cutting accessories
    List Technical Data of Non-mental Dedicated CNC Wire-cu
    List Other numerical control device
    News
    List Company news
    List Industry dynamics
    List Product knowledge
    Contact us
    List Contact us
    List Online Message
    Copyright: Dongguan Rongyang Machinery Co., Ltd. Address: No. 137, Xingyi Road, Chang'an Town, Dongguan City, China Service Hotline: 13925874136  Technical Support: Xinze Technology
    ENGLISH 中文
    收缩
    • QQ咨询

    • RONYAN CNC MACHINERY CO., LTD
    • RONYAN CNC MACHINERY CO., LTD
    • RONYAN CNC MACHINERY CO., LTD
    • 电话咨询

    • 0769-81767961
    一级a做爰片就在线看