Logo
    Contact us
    RONYAN CNC MACHINERY CO., LTD
    Tel:+86-769-81767961
    Fax:+86-769-81767962
    Mobile:+86-013925874136 13431125835
    ADD:D6-2 chang ron International ,Chang'an Town ,Dongguan City,China
    Product knowledge Location:Home >> News >> Product knowledge >> Detailed content

    Wire EDM processing work environment requirements

    release time:2018-05-23  viewed:1271次
     1. Satisfy the space required by the wire cutting machine
    2. Choose a place that can withstand the weight of the machine
    3. Select a place where there is no vibration and impact. Wire-cutting discharge machines are high-precision machining equipment. If there are vibrations and impacts at the places where they are placed, they will cause serious damage to the machine table, which will seriously affect its processing accuracy, shorten its service life, and even cause the machine to be scrapped.
    4. Choose a site that is not dusty and avoid flowing beside the numerous passages. The inherent characteristics of the wire-cutting discharge machine, the presence of dust in the air, will cause the screw of the machine to be seriously worn, which will affect the service life. The wire-cutting discharge machine belongs to the computer control. The disk used by the computer has very strict requirements on the dust in the air. When the dust in the disk enters, the disk will be damaged and the hard disk will be damaged. The wire-cutting discharge machine itself generates a lot of heat, so the electrical cabinet needs frequent air exchange. If there is too much dust in the air, it will accumulate on the various electrical components during the air exchange process, resulting in poor heat dissipation of the electrical components, resulting in the circuit board Burned out. Therefore, the machine dust screen should be cleaned frequently.
    Choose a place where the temperature changes little, and avoid sunlight passing through the window and top window glass and near the heat flow. High-precision parts processing products need to be carried out at a constant temperature, usually 20C at room temperature. Since the wire cutting discharge machine itself generates a considerable amount of heat during operation, if the temperature change is too large, the service life of the machine may be seriously affected.

    A previous: How to enhance the life of the wire cutting machine guide wheel
    Next news: Do you often have filaments of molybdenum wire?
    hotline line
    About us
    List enterprise profile
    List corporate culture
    List organizational structure
    List The board of directors.
    Products
    List CNC Medium Speed Wire Cut Electric Discharge Machi
    List Intelligent High-Speed Wire Cut Electrical Dischar
    List Numeric control Electric spark shaping machine
    List EMD drilling machines
    List Wire cutting accessories
    List Technical Data of Non-mental Dedicated CNC Wire-cu
    List Other numerical control device
    News
    List Company news
    List Industry dynamics
    List Product knowledge
    Contact us
    List Contact us
    List Online Message
    Copyright: Dongguan Rongyang Machinery Co., Ltd. Address: No. 137, Xingyi Road, Chang'an Town, Dongguan City, China Service Hotline: 13925874136  Technical Support: Xinze Technology
    ENGLISH 中文
    收缩
    • QQ咨询

    • RONYAN CNC MACHINERY CO., LTD
    • RONYAN CNC MACHINERY CO., LTD
    • RONYAN CNC MACHINERY CO., LTD
    • 电话咨询

    • 0769-81767961
    一级a做爰片就在线看